10/100/1000Base Ethernet over 4-port Framed E3/DS3 Ethernet Demarcation Device
- LAN Extension of 10/100/1000Base Ethernet over 4-port Framed E3/DS3 services
- 2 copper and 1 SFP fibre Ethernet connections, supporting a choice of fibre module
- Link State Forwarding
- Jumbo Frame Support (10kbyte)
- 802.3ah OAM Support
- 802.1q VLAN support (pass-through and tag switching)
- 802.1p priority queuing (4 queues)
- GFP mode for use with LAN Aggregation equipment
- RSTP support
- TACACS+ for secure authentication
- Zero Touch, Plug and Play Interface
- LED status indicators
- Compact modem style unit, built to European standards
- Integral auto-sensing power supply (100-250V AC or -48V DC versions)
- 12-24V DC power supply available on request
- Easy to install & maintain
- 1-port and 2-port E3/DS3 versions also available
This application shows an WCM3400 unit being used as the Ethernet demarcation device to deliver a Carrier Ethernet service from an MPLS core network. A wide choice of Ethernet connectivity is available for the user via the 10/100/1000baseT and SFP fibre ports. OAM support means that the WCM3400 can be remotely managed by the central network management system using standards based OAM packets. GFP is supported allowing single ended use with aggregation platforms in the core network.
WCM3400 units performing Ethernet service demarcation and media conversion
This application shows how a pair of WCM3400 units can be used to offer Ethernet service demarcation and LAN Extension functionality over four Framed E3/DS3 circuits.
WCM3400 units performing aggregation of services on multiple sites
This application shows how VLANs can also be used to select which site to forward user data to, e.g. when using a WCM3400 unit supporting four E3 ports at a central site supporting up to four sites with WCM3100, WCM3200 or WCM3400 units each supporting up to four E3 ports.
The WCM3400 is a switching media converter operating in store and forward mode. The WCM3400 supports auto-negotiation, and auto MDI/MDIX cross-over switching on the copper interface.
To ensure reliable operation, the WCM3400 supports Link State Forwarding, whereby a fault on the serial port will automatically force a link down on the user ports to indicate to the attached device that there is a link problem.
The WCM3400 supports the transmission of Jumbo frames.
The WCM3400 supports 802.3ah OAM which means that the Ethernet service can be managed and monitored right up to the customer delivery point. The future WCM3400 software development roadmap includes support for LACP, IEEE802.1ag and Y.1731 OAM standards.
The WCM3400 is provided with an SFP module with LC connector supporting for example 1000Base-SX for 550 metres operation over multi-mode fibre, or 1000Base-LX for up to 10km over a single-mode fibre.
The WCM3400 is ordered without an SFP fitted, although customers can subsequently change their interface type. Please contact Metrodata for price and availability of SFP modules including long haul, 1550nm, bi-directional and CWDM.
Compatibility:
GFP mode for use with LAN Aggregation equipment
The WCM3400 is available in a choice of 100-250 VAC or -48 VDC integrated power supplies.
The WCM3400 can easily be rackmounted in either a 1U two unit rackmount kit, a 6U eighteen unit rackmount kit.
The WCM3400 is part of a wide range of LAN extension products from Metrodata.
WAN Port Specs |
|
| Port | 4-port Framed E3/DS3 conforming to G.703 |
| Interface |
Mini-BNC pair (75 ohm) per port |
| Framing |
E3: G.751 (with or without CRC4) or unframed DS3: C-bit parity or unframed |
| Line Coding |
E3: HDB3 DS3: B3ZS |
| Bit Rate | E3: 34.368Mbps +/- 20 ppm DS3: 44.736Mbps +/- 20ppm |
1000Base-X Fibre Interface |
|
| Port | IEEE802.3z 1000BaseX |
| Interface | Dual LC connectors |
SFP 1000Base SX |
||
| Wavelength | 850nm multimode |
|
| TX Power | -9.5 to -3dBm | |
| Max Rx input power | 0dBm | |
| Rx sensitivity | -17 to 0dBm | |
| Optical loss budget | 7.5dB (550m) |
|
SFP 1000Base LX |
||
| Wavelength | 1300nm singlemode |
|
| TX Power | -9.5 to -3dBm | |
| Max Rx input power | -3dBm | |
| Rx sensitivity | -19 to -3dBm | |
| Optical loss budget | 9.5dB (10km) |
|
10/100/1000BaseT Electrical Interface |
||
| Port | 2x 10/100/1000BaseT with auto-negotiation and Jumbo frame support |
|
| Interface | RJ45 (Auto Crossover MDI/MDIX) | |
| Operating mode | Auto Negotiate, 10M, 100M, 1000M, Full Duplex, Half Duplex | |
| LEDs | Link, Activity, Speed | |
Compliance & Approvals |
|
| Safety | EN60950 |
| IEC60825-1 Class 1 Laser Eye Safety | |
| EMC | EN55022, EN50082 |
Environment |
|
| Temperature | 0 - 50 deg C |
| 0 - 95% RH, non condensing | |
| Storage Temp | -40 to 100 deg C |
| Pressure | 86 - 106 kPa |
Power Supply Options |
|
| -48 VDC | -36 to -72V DC, 125 - 65 mA |
| AC Mains | 100 - 250V AC, 50 - 60Hz, 60 - 25mA |
| Power Consumption | 6 watts approx when operating |
Packaging |
|
| Type | 1U 19 inch Rackmount |
| Dimensions | 435 x 213 x 43 mm (W x D x H) |
| Order Code |
||
| Product | AC Mains: 100 - 250 VAC | DC Power: -48 VDC |
| WCM3400 | 80-70-4543 | 80-71-4543 |
Product variants with 12V to 24V DC operation are also available on request.
If you require further information please contact our sales team with your requirements.
| Commonly used SFP transceivers |
Order Code | Description |
| 1Gbps Multimode 550m 850nm |
80-31-011 |
Multimode interface fibre optic loss budget 7.5dB |
| 1Gbps Singlemode 10km 1300nm |
80-31-031 |
Singlemode interface fibre optic loss budget 9.5dB |
| 1Gbps Singlemode 40km 1300nm |
80-31-033 |
Singlemode interface fibre optic loss budget 18dB |
| 1Gbps Singlemode 80km 1550nm |
80-31-042 |
Singlemode interface fibre optic loss budget 20dB |
| 100Mbps Multimode 2km 1300nm |
80-30-021 |
Multimode interface fibre optic loss budget 8.5dB |
| 100Mbps Singlemode 10km 1300nm |
80-30-031 |
Singlemode interface fibre optic loss budget 13dB |
| 100Mbps Singlemode 40km 1300nm |
80-30-033 |
Singlemode interface fibre optic loss budget 20dB |
| 100Mbps Singlemode 80km 1550nm |
80-30-042 |
Singlemode interface fibre optic loss budget 29dB |
Other SFPs are available on request including long haul, 1550nm, CWDM and bi-directional.
Whilst the MetroCONNECT product range uses industry standard user exchangeable SFPs, it is recommended that these are purchased from Metrodata to guarantee their specification and compatibilty with each other.
If you require another SFP please contact our sales team with your requirements.
MetroCONNECT Ethernet Service Delivery Products
- MetroCONNECT Overview and MC12000 Chassis
- FCC9000: Dual 10/100/1000baseT to 1000base-X Ethernet Media Converter Module
- FCM9000: 10/100/1000baseT to 1000base-X Ethernet Demarcation Device
- WCC1100: 10/100/1000baseT plus SFP Ethernet over Fractional E1/T1 LAN Extension Module
- WCM1100: 10/100/1000baseT plus SFP Ethernet over Fractional E1/T1 LAN Extension Device
- WCC1400: 10/100/1000baseT plus SFP Ethernet over 4-port Fractional E1/T1 LAN Extension Module
- WCM1400: 10/100/1000baseT plus SFP Ethernet over 4-port Fractional E1/T1 LAN Extension Device
- WCC1800: 10/100/1000baseT plus SFP Ethernet over 8-port Fractional E1/T1 LAN Extension Module
- WCM1800: 10/100/1000baseT plus SFP Ethernet over 8-port Fractional E1/T1 LAN Extension Device
- WCM1820: 10/100/1000baseT plus SFP Ethernet over 16-port Fractional E1/T1 LAN Extension Device
- WCC3100: 10/100/1000baseT plus SFP Ethernet over Framed E3/DS3 LAN Extension Module
- WCM3100: 10/100/1000baseT plus SFP Ethernet over Framed E3/DS3 LAN Extension Device
- WCC3200: 10/100/1000baseT plus SFP Ethernet over 2-port Framed E3/DS3 LAN Extension Module
- WCM3200: 10/100/1000baseT plus SFP Ethernet over 2-port Framed E3/DS3 LAN Extension Device
- WCM3400: 10/100/1000baseT plus SFP Ethernet over 4-port Framed E3/DS3 LAN Extension Device
- WCC5100: 10/100/1000baseT plus SFP Ethernet over Sonet OC-3 / SDH STM-1 LAN Extension Module
- WCM5100: 10/100/1000baseT plus SFP Ethernet over Sonet OC-3 / SDH STM-1 LAN Extension Device
- WCC_Serial: 10/100/1000baseT plus SFP Ethernet over Serial LAN Extension Module
- WCM_Serial: 10/100/1000baseT plus SFP Ethernet over Serial LAN Extension Device
- LHC1000: 10/100/1000baseT plus SFP Ethernet over HSSI Serial LAN Extension Module
- LHM1000: 10/100/1000baseT plus SFP Ethernet over HSSI Serial LAN Extension Device
