The integrated 4-port LAN switch supports local switching, thereby removing the need for external switches or hubs in smaller LAN installations.
LAN Extension over Serial, E1, E3, DS3 leased lines
- Must be used in pairs
- Feature rich LAN extender over X.21, V.35, E1, E3, DS3, STM-1 or OC-3 leased lines
- Quad port Ethernet switch on subscriber side, with wirespeed local switching
- 4 Auto-negotiating subscriber 10/100 BaseT ports, with auto MDI/MDIX switching
- Wire speed filtering of local packets
- Efficient HDLC encapsulation on WAN port: 82236 packets per second on DS3
- Easy to install & maintain
- Integral auto-sensing power supply (100-250V AC or -48V DC versions)
- 12-24V DC power supply available on request
- Compact modem style unit, built to European standards
- Quad option available with 4 WAN-in-a-Can units in a 1U box
- Can also be used to offer asymmetric Ethernet services via EIA530 satellite modems
- WC1000 - quad 10/100baseT switch with E1 uplink
- WC X.21 - quad 10/100baseT switch with X.21 uplink
- WC V.35 - quad 10/100baseT switch with V.35 uplink
- WC3445 - quad 10/100baseT switch with switchable E3 or DS3 uplink
- WC155 - 10/100baseT extension over STM-1 or OC-3 link
- WCM1000 - Managed Ethernet Extender over E1/T1 service
- Connecting two LANs together using an unframed E1 2M G.703 leased line
- Connecting two LANs together using a fractional E1 Nx64kbps 2M G.703 leased line
- Connecting two LANs together using an X.21 leased line
- Connecting two LANs together using a V.35 leased line
- Connecting two LANs together using an E3 leased line
- Connecting two LANs together using a DS3 leased line
- Delivering an asymmetric Ethernet service via an EIA530 satellite modem
Connecting two LANs together using an unframed E1 2M G.703 leased line
This application shows two LANs connected together using an E1 leased line, such as a BT Megatream-2 circuit. As a plug and play Ethernet switching device the WC1000 is a straight forward and cost effective alternative to the use of routers in small and medium sized networks.
Connecting two LANs together using a fractional E1 Nx64kbps G.703 leased line
This application shows two LANs connected together using a fractional E1 Nx64kbps G.703 leased line, such as a BT Kilostream-N circuit with G.703 connectivity. In this case the WC X.21 is used in conjunction with a DC3000 to interface to the leased line. As plug and play Ethernet switching devices the WAN-in-a-Can family of products are a straight forward and cost effective alternative to the use of routers in small and medium sized networks.
Connecting two LANs together using an X.21 leased line
This application shows two LANs connected together using an X.21 leased line, such as a BT Kilostream-N circuit. As a plug and play Ethernet switching device the WC X.21 is a straight forward and cost effective alternative to the use of routers in small and medium sized networks.
Connecting two LANs together using a V.35 leased line
This application shows two LANs connected together using a V.35 leased line. As a plug and play Ethernet switching device the WC V.35 is a straight forward and cost effective alternative to the use of routers in small and medium sized networks.
Connecting two LANs together using an E3 leased line
This application shows two LANs connected together using an E3 leased line, such as a BT Megastream-34 circuit. As a plug and play Ethernet switching device the WC3445 is a straight forward and cost effective alternative to the use of routers in small and medium sized networks.
Connecting two LANs together using a DS3 leased line
This application shows two LANs connected together using a DS3 leased line, such as a BT Megastream-45 circuit. As a plug and play Ethernet switching device the WC3445 is a straight forward and cost effective alternative to the use of routers in small and medium sized networks.
Delivering an asymmetric Ethernet service via an EIA530 satellite modem
This application shows an Ethernet service delivered via an EIA530 satellite modem. In this application the WC X.21 supports local switching, wirespeed filtering and asymmetric data rates up to 20Mbps with an absolute minimum of overhead. This application requires a proprietary EIA530 to X.21 conversion cable.
Full wirespeed switching and filtering between the 10/100 BaseT LAN ports is supported so that only packets destined for the remote site are forwarded over the link. Different WAN-in-a-Can models support leased line circuits from 64kbps to 45Mbps, with X.21, V.35, E1 , E3, and DS3 connector options.
In most installations the WAN-in-a-Can products require no configuration, and are therefore truly "plug and play". The subscriber ports perform auto-negotiation and support both 10M and 100M operation in full duplex (FD) or half duplex (HD) modes. Manual selection of 100M FD operation enables connection to fixed router ports. Cabling issues are minimised through the use of automatic MDI/MDIX selection on these ports.
The highly efficient HDLC encapsulation of packets ensures that maximum throughput is achieved on the WAN link. Internal packet buffering enables each WAN-in-a-Can product to smooth out bursty traffic without packet loss.
For low bandwidth applications such as BT's Kilostream, the WC X.21 and WC V.35 models offer a choice of X.21 or V.35 DTE interfaces. The X.21 interface is presented on a 15 way D-Type connector and the V.35 on a 34 way M-rack connector. The serial port operates in DTE mode, and requires the attached DCE (e.g. Kilostream NTU) to supply timing.
The WC X.21 can also be operated in a dual-clock EIA530 mode to support asymmetric operation with an EIA530 satellite modem . An external cable can be used to convert an X.21 interface into EIA-530 .
These WAN-in-a-CAN products can easily be rackmounted in either a 1U two unit rackmount kit, in a 6U eighteen unit rackmount kit or are available in a 1U quad box (1U rackmountable unit containing 4 x WAN-in-a-Can units).
The WC1000 is also available in a card based format for use with the 4U 12-slot MetroRack managed chassis.
Subscriber Port |
|
| No. of Ports | 4 |
| Presentation | 10/100 Base TX, RJ45, Auto-MDI/MDI-X |
| LED Support | Link / Activity & Speed |
| Operating Mode | Auto-negotiate for 10/100, Full or Half Duplex |
| Port Filtering Rate | 148810 packets/second |
| Port Switching Rate | 148810 packets/second |
| Switch Mode | Any to any |
| MAC Address Table | 4096 entires |
| Packet Size | 64 bytes minimum |
| 1536 bytes maximum (except older versions and WC3445 which support 1522 bytes maximum) |
|
WAN Port Specs |
WC X.21 | WC V.35 | WC1000 | WC3445 | WC3445 |
| Mode | Serial | Serial | E1 | E3 | DS3 |
| Presentation |
15 way Male D Type |
34 way female M rack |
BNC (75ohm) RJ45 (120ohm) |
BNC (75ohm) |
BNC (75ohm) |
| Line Rate | 20Mbps (max) | 20Mbps (max) | 2.048Mbps | 34.368Mbps | 44.736Mbps |
| Frame Mode | Unframed | Unframed | Unframed | Unframed | Unframed |
| Timing | DCE Supplied | DCE Supplied | Internal/loop | Internal/loop | Internal/loop |
| Encapsulation | HDLC | HDLC | HDLC | HDLC | HDLC |
| Max Packet Rate | 38462 at 20Mbps | 38462 at 20Mbps | 4064 | 64120 | 82236 |
| LEDs | Tx/Rx Packet | Tx/Rx Packet | Tx/Rx Packet, Alarm | Tx/Rx Packet, Alarm | Tx/Rx Packet, Alarm |
| Alarms | None | None | LOS | LOS | LOS |
| Diagnostics | None | None | External loop | External loop | External loop |
Packaging |
|
| Type | Modem, 1U high without feet, IP30C |
Dimensions W x D x H mm |
|
| Rackmount | 202 x 132 x 44 (without feet) |
| Desktop | 202 x 132 x 48 (with feet) |
Environment |
|
| Temp | 0 - 50 deg C |
| Humidity | 95% RH, non-condensing |
| Pressure | 86 - 106 KPA |
Power Supply |
|
| AC Mains | 100-250VAC, 50-60Hz, 60-24mA IEC Connector |
| -48VDC | -40 to -72VDC, 200-100mA |
Order Code
|
||
Product |
AC Mains: 100 - 250 VAC | DC Power: -48 VDC |
| WC1000 | 80-05-541 | 80-21-541 |
| WC X.21 | 80-05-545 | 80-21-545 |
| WC V.35 | 80-05-546 | 80-21-546 |
| WC3445 | 80-05-542 | 80-21-542 |
| 2 Unit Rackmount Kit | 80-05-256 | 80-05-256 |
| 18 Unit Rackmount Kit | 80-05-250 | 80-05-255 |
| Quad WC1000 | 80-405-541 | 80-421-541 |
| Quad WC X.21 | 80-405-545 | 80-421-545 |
| Quad WC V.35 | 80-405-546 | 80-421-546 |
| Quad WC3445 | 80-405-542 | 80-421-542 |
| MetroRack WC1000 Module | 80-15-541 | |
Product variants with 12V to 24V DC operation are also available on request.
Ethernet Extenders
- WC X.21: Ethernet over X.21
- WC V.35: Ethernet over V.35
- WC1000: Ethernet over E1 G.703
- WCM1000: Ethernet over E1 G.703
- WC3445: Ethernet over E3
- WC3445: Ethernet over DS3
- WC155: Ethernet over STM-1/OC-3
- LH1000: Ethernet over HSSI
- LV2000: Ethernet over LVDS
- MetroLAN1000: E1/T1/Ethernet over STM-1/OC-3 Fibre Multiplexer
- MetroLAN2000: Ethernet/E3/DS3/E1/T1 over STM-1/OC-3 Fibre Multiplexer
E3 Converters
- DC3445: E3 to HSSI
- FC3X00: E3 over Fibre (MM/SMSH/SMLH)
- FM4900: E3 to HSSI with SNMP converter
- MetroLAN2000: Multiple E3/DS3/E1/T1/Ethernet over STM-1/OC-3 Fibre Multiplexer
DS3 Converters
- DC3445: DS3 to HSSI
- FC3X00: DS3 over Fibre (MM/SMSH/SMLH)
- FM4950: DS3 to HSSI with SNMP converter
- MetroLAN2000: Multiple DS3/E3/E1/T1/Ethernet over STM-1/OC-3 Fibre Multiplexer
E1 Converters
- DC1000: E1 G.703 to X.21
- DC1200: E1 G.703 to V35
- DC3000: Fractional E1 G.704 to X.21
- DC3200: Fractional E1 G.704 to V.35
- WC1000: Ethernet over E1 G.703
- FC1X00: E1 over Fibre (MM/SMSH/SMLH)
- FM4000: Fractional E1 G.704 to X.21/V.35 with SNMP Converter
- FM4200: Fractional E1 G.704 to E1 + X.21/V.35 with SNMP Multiplexer
- FM4500: Fractional E1 G.704 to E1 + 4xX.21/V.35 with SNMP Multiplexer
- Emux: Multiple E1 over Fibre Multiplexer
- MetroLAN1000: Multiple E1/T1/Ethernet Fibre Multiplexer
- MetroLAN2000: Multiple E1/T1/E3/DS3/Ethernet Fibre Multiplexer
